punchline
This is an old revision of the document!
Table of Contents
PunchLine Adaptive Delay
Instrument delay with fine controls for precise delay ciseling.
Overview
- Mono delay line - Faust smooth Delay model
- Guitar level input, One guitar level output
- Delay Tail to maintain delay tap propagation when FX is turned Off, otherwise turning off operates “like” a true bypass
- Hi and Low frequencies cut within feedback channel
- Three modes
- Manual Mode : Time adjust Manually from TBD to TBD, feedback manual adjust from 0.1 to 1.1
- Tap Tempo mode : Delay time adjusted using Tap Tempo input
- Tap Signature mode : Delay time adjusted using fractions of tap tempo, selected by delay time knob.
Operation
Controls
- Delay control
- Feedback
- Time
- Filter
- Reverb control
- Low RT60 : Zita model Low frequency RT60, cutoff frequency at 400Hz, 1 to 8 second long
- High RT60 : Zita model High frequency RT60, cutoff frequency at 400Hz, 1 to 8 second long
- Damping : High frequnecy damping
Mode Tap Signature
Schematic and Interconnection
Signal | Pin | Functional | |
---|---|---|---|
Pot 1 | 18 | A0 | Feed |
Pot 2 | 20 | A2 | Time |
Pot 3 | 21 | A3 | Filter |
Pot 4 | 26 | A8 | Spare |
GND | 1 | GND | |
Punch | 2 | 0-RX1 | |
Leds | 3 | 1-TX1 | |
Tap | 4 | 2_Out | |
Mode | 5 | 3_LRCLK2 | |
Tail | 6 | 4_BCLK | |
On_Off | 7 | 5_IN2 |
Design
punchline.1653077649.txt.gz · Last modified: 2022/05/20 20:14 by wadmin